L2x2x1/4 — Dimensions, Weight & Section Properties
Steel angle (L-shape) per ASTM A6 / AISC Steel Construction Manual
L2x2x1/4 is a hot-rolled steel angle with equal 2 in (50.8 mm) legs, 0.25 in thick, weighing 3.19 pounds per foot (4.7 kg/m). All values below are the standard AISC published section properties, with metric equivalents alongside.
Typical uses: bracing, lintels, shelf supports, frames, and connection material. Angles are weak about their minor axis — long unbraced angles need lateral restraint. For a quick check, see the deflection example below or open the beam calculator.
L2x2x1/4: cross-section drawn to scale from the AISC dimensions (2 × 2 × 0.25 in)Dimensions
| Long leg | 2 in (50.8 mm) |
| Equal leg | 2 in (50.8 mm) |
| Thickness t | 0.25 in (6.4 mm) |
Weight & Cross-Section
| Weight per foot | 3.19 lb/ft (4.7 kg/m) |
| 20 ft bar | 64 lb |
| 40 ft bar | 128 lb |
| Area A | 0.94 in² (6.1 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 0.35 in⁴ (14 cm⁴) |
| Section modulus Sx | 0.24 in³ (4 cm³) |
| Radius of gyration rx | 0.61 in |
| Moment of inertia Iy | 0.35 in⁴ (14 cm⁴) |
| Section modulus Sy | 0.24 in³ (4 cm³) |
| Radius of gyration ry | 0.61 in |
Compared with the neighbouring sizes
| Shape | legs (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| L2x2x3/16 | 2 × 2 | 2.44 | 0.27 | 0.19 | −24 % | −21 % |
| L2x2x1/4 (this page) | 2 × 2 | 3.19 | 0.35 | 0.24 | — | — |
Deflection example
A simply supported L2x2x1/4 spanning 3 ft with a 10 kip point load at midspan deflects 0.97 in (E = 29,000 ksi, Ix = 0.35 in⁴). The L/360 serviceability limit for this span is 0.1 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a L2x2x1/4 angle weigh?
L2x2x1/4 weighs 3.19 pounds per foot (4.7 kg/m). A 20 ft bar weighs 64 lb and a 40 ft bar 128 lb.
What are the dimensions of a L2x2x1/4?
L2x2x1/4 has two equal 2 in (50.8 mm) legs, both 0.25 in thick. Angle legs are measured outside-to-outside, and both legs share the same thickness.
What are the dimensions of a L2x2x1/4 in mm?
L2x2x1/4 has two equal 50.8 mm legs, 6.4 mm thick. In metric section properties: Ix = 14 cm⁴, Sx = 4 cm³.
How much does a L2x2x1/4 weigh in kg?
4.7 kg per meter. A 6 m bar weighs 28 kg and a 12 m bar 57 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a L2x2x1/4?
About the strong axis, Ix = 0.35 in⁴ (14 cm⁴) with section modulus Sx = 0.24 in³. About the weak axis, Iy = 0.35 in⁴ and Sy = 0.24 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
L2x2x1/4 or L2x2x3/16 — what does one size down change?
L2x2x3/16 is about 24% lighter (2.44 vs 3.19 lb/ft) but about 21% less stiff (Ix 0.27 vs 0.35 in⁴). Check deflection before downsizing — stiffness falls much faster than weight.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About