L4x4x1/4 — Dimensions, Weight & Section Properties
Steel angle (L-shape) per ASTM A6 / AISC Steel Construction Manual
L4x4x1/4 is a hot-rolled steel angle with equal 4 in (101.6 mm) legs, 0.25 in thick, weighing 6.6 pounds per foot (9.8 kg/m). All values below are the standard AISC published section properties, with metric equivalents alongside.
Typical uses: bracing, lintels, shelf supports, frames, and connection material. Angles are weak about their minor axis — long unbraced angles need lateral restraint. For a quick check, see the deflection example below or open the beam calculator.
Dimensions
| Long leg | 4 in (101.6 mm) |
| Equal leg | 4 in (101.6 mm) |
| Thickness t | 0.25 in (6.4 mm) |
Weight & Cross-Section
| Weight per foot | 6.6 lb/ft (9.8 kg/m) |
| 20 ft bar | 132 lb |
| 40 ft bar | 264 lb |
| Area A | 1.93 in² (12.5 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 3 in⁴ (125 cm⁴) |
| Section modulus Sx | 1.03 in³ (17 cm³) |
| Radius of gyration rx | 1.25 in |
| Moment of inertia Iy | 3 in⁴ (125 cm⁴) |
| Section modulus Sy | 1.03 in³ (17 cm³) |
| Radius of gyration ry | 1.25 in |
Compared with the neighbouring sizes
| Shape | legs (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| L4x4x1/4 (this page) | 4 × 4 | 6.6 | 3 | 1.03 | — | — |
| L4x4x5/16 | 4 × 4 | 8.2 | 3.67 | 1.27 | +24 % | +22 % |
Deflection example
A simply supported L4x4x1/4 spanning 6 ft with a 10 kip point load at midspan deflects 0.89 in (E = 29,000 ksi, Ix = 3 in⁴). The L/360 serviceability limit for this span is 0.2 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a L4x4x1/4 angle weigh?
L4x4x1/4 weighs 6.6 pounds per foot (9.8 kg/m). A 20 ft bar weighs 132 lb and a 40 ft bar 264 lb.
What are the dimensions of a L4x4x1/4?
L4x4x1/4 has two equal 4 in (101.6 mm) legs, both 0.25 in thick. Angle legs are measured outside-to-outside, and both legs share the same thickness.
What are the dimensions of a L4x4x1/4 in mm?
L4x4x1/4 has two equal 101.6 mm legs, 6.4 mm thick. In metric section properties: Ix = 125 cm⁴, Sx = 17 cm³.
How much does a L4x4x1/4 weigh in kg?
9.8 kg per meter. A 6 m bar weighs 59 kg and a 12 m bar 118 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a L4x4x1/4?
About the strong axis, Ix = 3 in⁴ (125 cm⁴) with section modulus Sx = 1.03 in³. About the weak axis, Iy = 3 in⁴ and Sy = 1.03 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
L4x4x1/4 or L4x4x5/16 — what does one size up change?
L4x4x5/16 is about 24% heavier (8.2 vs 6.6 lb/ft) but about 22% stiffer (Ix 3.67 vs 3 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About