L5x3x1/4 — Dimensions, Weight & Section Properties
Steel angle (L-shape) per ASTM A6 / AISC Steel Construction Manual
L5x3x1/4 is a hot-rolled steel angle with a 5 in (127 mm) long leg and a 3 in (76.2 mm) short leg, 0.25 in thick, weighing 6.6 pounds per foot (9.8 kg/m). All values below are the standard AISC published section properties, with metric equivalents alongside.
Typical uses: bracing, lintels, shelf supports, frames, and connection material. Angles are weak about their minor axis — long unbraced angles need lateral restraint. For a quick check, see the deflection example below or open the beam calculator.
Dimensions
| Long leg | 5 in (127 mm) |
| Short leg | 3 in (76.2 mm) |
| Thickness t | 0.25 in (6.4 mm) |
Weight & Cross-Section
| Weight per foot | 6.6 lb/ft (9.8 kg/m) |
| 20 ft bar | 132 lb |
| 40 ft bar | 264 lb |
| Area A | 1.94 in² (12.5 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 5.09 in⁴ (212 cm⁴) |
| Section modulus Sx | 1.51 in³ (25 cm³) |
| Radius of gyration rx | 1.61 in |
| Moment of inertia Iy | 1.41 in⁴ (59 cm⁴) |
| Section modulus Sy | 0.6 in³ (10 cm³) |
| Radius of gyration ry | 0.85 in |
Compared with the neighbouring sizes
| Shape | legs (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| L5x3x1/4 (this page) | 5 × 3 | 6.6 | 5.09 | 1.51 | — | — |
Deflection example
A simply supported L5x3x1/4 spanning 8 ft with a 10 kip point load at midspan deflects 1.25 in (E = 29,000 ksi, Ix = 5.09 in⁴). The L/360 serviceability limit for this span is 0.27 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a L5x3x1/4 angle weigh?
L5x3x1/4 weighs 6.6 pounds per foot (9.8 kg/m). A 20 ft bar weighs 132 lb and a 40 ft bar 264 lb.
What are the dimensions of a L5x3x1/4?
L5x3x1/4 has a 5 in long leg and a 3 in short leg, both 0.25 in thick. Angle legs are measured outside-to-outside, and both legs share the same thickness.
What are the dimensions of a L5x3x1/4 in mm?
L5x3x1/4 has a 127 mm long leg and a 76.2 mm short leg, 6.4 mm thick. In metric section properties: Ix = 212 cm⁴, Sx = 25 cm³.
How much does a L5x3x1/4 weigh in kg?
9.8 kg per meter. A 6 m bar weighs 59 kg and a 12 m bar 118 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a L5x3x1/4?
About the strong axis, Ix = 5.09 in⁴ (212 cm⁴) with section modulus Sx = 1.51 in³. About the weak axis, Iy = 1.41 in⁴ and Sy = 0.6 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About