L6x6x1/2 — Dimensions, Weight & Section Properties
Steel angle (L-shape) per ASTM A6 / AISC Steel Construction Manual
L6x6x1/2 is a hot-rolled steel angle with equal 6 in (152.4 mm) legs, 0.5 in thick, weighing 19.6 pounds per foot (29.2 kg/m). All values below are the standard AISC published section properties, with metric equivalents alongside.
Typical uses: bracing, lintels, shelf supports, frames, and connection material. Angles are weak about their minor axis — long unbraced angles need lateral restraint. For a quick check, see the deflection example below or open the beam calculator.
L6x6x1/2: cross-section drawn to scale from the AISC dimensions (6 × 6 × 0.5 in)Dimensions
| Long leg | 6 in (152.4 mm) |
| Equal leg | 6 in (152.4 mm) |
| Thickness t | 0.5 in (12.7 mm) |
Weight & Cross-Section
| Weight per foot | 19.6 lb/ft (29.2 kg/m) |
| 20 ft bar | 392 lb |
| 40 ft bar | 784 lb |
| Area A | 5.77 in² (37.2 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 19.9 in⁴ (828 cm⁴) |
| Section modulus Sx | 4.59 in³ (75 cm³) |
| Radius of gyration rx | 1.86 in |
| Moment of inertia Iy | 19.9 in⁴ (828 cm⁴) |
| Section modulus Sy | 4.59 in³ (75 cm³) |
| Radius of gyration ry | 1.86 in |
Compared with the neighbouring sizes
| Shape | legs (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| L6x6x3/8 | 6 × 6 | 14.9 | 15.4 | 3.51 | −24 % | −23 % |
| L6x6x1/2 (this page) | 6 × 6 | 19.6 | 19.9 | 4.59 | — | — |
| L6x6x5/8 | 6 × 6 | 24.2 | 24.1 | 5.64 | +23 % | +21 % |
Deflection example
A simply supported L6x6x1/2 spanning 10 ft with a 10 kip point load at midspan deflects 0.62 in (E = 29,000 ksi, Ix = 19.9 in⁴). The L/360 serviceability limit for this span is 0.33 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a L6x6x1/2 angle weigh?
L6x6x1/2 weighs 19.6 pounds per foot (29.2 kg/m). A 20 ft bar weighs 392 lb and a 40 ft bar 784 lb.
What are the dimensions of a L6x6x1/2?
L6x6x1/2 has two equal 6 in (152.4 mm) legs, both 0.5 in thick. Angle legs are measured outside-to-outside, and both legs share the same thickness.
What are the dimensions of a L6x6x1/2 in mm?
L6x6x1/2 has two equal 152.4 mm legs, 12.7 mm thick. In metric section properties: Ix = 828 cm⁴, Sx = 75 cm³.
How much does a L6x6x1/2 weigh in kg?
29.2 kg per meter. A 6 m bar weighs 175 kg and a 12 m bar 350 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a L6x6x1/2?
About the strong axis, Ix = 19.9 in⁴ (828 cm⁴) with section modulus Sx = 4.59 in³. About the weak axis, Iy = 19.9 in⁴ and Sy = 4.59 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
L6x6x1/2 or L6x6x5/8 — what does one size up change?
L6x6x5/8 is about 23% heavier (24.2 vs 19.6 lb/ft) but about 21% stiffer (Ix 24.1 vs 19.9 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About