C3x5 — Dimensions, Weight & Section Properties
American Standard (C) channel per ASTM A6 / AISC Steel Construction Manual
C3x5 is an American Standard steel channel 3 inches (76.2 mm) deep with a 1.5 in (38.1 mm) flange, weighing 5 pounds per foot (7.4 kg/m) — that is what the "5" in the designation means. All values below are the standard AISC published section properties used in US structural design, with metric equivalents alongside. Channel flanges are tapered, so the flange thickness listed is the AISC average value.
Typical uses: stair stringers, trailer and equipment frames, rails, lintels, and bracing — anywhere a flat back against a wall or web is handy. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
C3x5: cross-section drawn to scale from the AISC dimensions (d 3, bf 1.5, tw 0.258, tf 0.273 in)Dimensions
| Depth d | 3 in (76.2 mm) |
| Flange width bf | 1.5 in (38.1 mm) |
| Web thickness tw | 0.258 in (6.6 mm) |
| Avg. flange thickness tf | 0.273 in (6.9 mm) |
Weight & Cross-Section
| Weight per foot | 5 lb/ft (7.4 kg/m) |
| 20 ft bar | 100 lb |
| 40 ft bar | 200 lb |
| Area A | 1.47 in² (9.5 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 1.85 in⁴ (77 cm⁴) |
| Section modulus Sx | 1.23 in³ (20 cm³) |
| Radius of gyration rx | 1.12 in |
| Moment of inertia Iy | 0.24 in⁴ (10 cm⁴) |
| Section modulus Sy | 0.23 in³ (4 cm³) |
| Radius of gyration ry | 0.41 in |
Compared with the neighbouring sizes
| Shape | d × bf (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| C3x4.1 | 3 × 1.41 | 4.1 | 1.65 | 1.1 | −18 % | −11 % |
| C3x5 (this page) | 3 × 1.5 | 5 | 1.85 | 1.23 | — | — |
| C3x6 | 3 × 1.6 | 6 | 2.07 | 1.38 | +20 % | +12 % |
Deflection example
A simply supported C3x5 spanning 5 ft with a 10 kip point load at midspan deflects 0.84 in (E = 29,000 ksi, Ix = 1.85 in⁴). The L/360 serviceability limit for this span is 0.17 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a C3x5 channel weigh?
C3x5 weighs 5 pounds per foot (7.4 kg/m). The number after the "x" in the designation is always the weight in lb/ft. A 20 ft bar weighs 100 lb and a 40 ft bar 200 lb.
What are the dimensions of a C3x5?
C3x5 is exactly 3 in (76.2 mm) deep with a 1.5 in (38.1 mm) wide flange. The web is 0.26 in thick; the tapered flanges average 0.27 in. Unlike W-shapes, C-channel depths are exact — a C10 is always 10.00 in deep.
What are the dimensions of a C3x5 in mm?
C3x5 is 76.2 mm deep with a 38.1 mm wide flange; the web is 6.6 mm and the flange 6.9 mm thick. In metric section properties: Ix = 77 cm⁴, Sx = 20 cm³.
How much does a C3x5 weigh in kg?
7.4 kg per meter. A 6 m bar weighs 45 kg and a 12 m bar 89 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a C3x5?
About the strong axis, Ix = 1.85 in⁴ (77 cm⁴) with section modulus Sx = 1.23 in³. About the weak axis, Iy = 0.24 in⁴ and Sy = 0.23 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
C3x5 or C3x6 — what does one size up change?
C3x6 is about 20% heavier (6 vs 5 lb/ft) but about 12% stiffer (Ix 2.07 vs 1.85 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About