C9x15 — Dimensions, Weight & Section Properties
American Standard (C) channel per ASTM A6 / AISC Steel Construction Manual
C9x15 is an American Standard steel channel 9 inches (228.6 mm) deep with a 2.49 in (63.2 mm) flange, weighing 15 pounds per foot (22.3 kg/m) — that is what the "15" in the designation means. All values below are the standard AISC published section properties used in US structural design, with metric equivalents alongside. Channel flanges are tapered, so the flange thickness listed is the AISC average value.
Typical uses: stair stringers, trailer and equipment frames, rails, lintels, and bracing — anywhere a flat back against a wall or web is handy. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
Dimensions
| Depth d | 9 in (228.6 mm) |
| Flange width bf | 2.49 in (63.2 mm) |
| Web thickness tw | 0.285 in (7.2 mm) |
| Avg. flange thickness tf | 0.413 in (10.5 mm) |
Weight & Cross-Section
| Weight per foot | 15 lb/ft (22.3 kg/m) |
| 20 ft bar | 300 lb |
| 40 ft bar | 600 lb |
| Area A | 4.41 in² (28.5 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 51 in⁴ (2,123 cm⁴) |
| Section modulus Sx | 11.3 in³ (185 cm³) |
| Radius of gyration rx | 3.4 in |
| Moment of inertia Iy | 1.91 in⁴ (79 cm⁴) |
| Section modulus Sy | 1.01 in³ (17 cm³) |
| Radius of gyration ry | 0.66 in |
Compared with the neighbouring sizes
| Shape | d × bf (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| C9x13.4 | 9 × 2.43 | 13.4 | 47.8 | 10.6 | −11 % | −6 % |
| C9x15 (this page) | 9 × 2.49 | 15 | 51 | 11.3 | — | — |
| C9x20 | 9 × 2.65 | 20 | 60.9 | 13.5 | +33 % | +19 % |
Deflection example
A simply supported C9x15 spanning 14 ft with a 10 kip point load at midspan deflects 0.67 in (E = 29,000 ksi, Ix = 51 in⁴). The L/360 serviceability limit for this span is 0.47 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a C9x15 channel weigh?
C9x15 weighs 15 pounds per foot (22.3 kg/m). The number after the "x" in the designation is always the weight in lb/ft. A 20 ft bar weighs 300 lb and a 40 ft bar 600 lb.
What are the dimensions of a C9x15?
C9x15 is exactly 9 in (228.6 mm) deep with a 2.49 in (63.2 mm) wide flange. The web is 0.29 in thick; the tapered flanges average 0.41 in. Unlike W-shapes, C-channel depths are exact — a C10 is always 10.00 in deep.
What are the dimensions of a C9x15 in mm?
C9x15 is 228.6 mm deep with a 63.2 mm wide flange; the web is 7.2 mm and the flange 10.5 mm thick. In metric section properties: Ix = 2,123 cm⁴, Sx = 185 cm³.
How much does a C9x15 weigh in kg?
22.3 kg per meter. A 6 m bar weighs 134 kg and a 12 m bar 268 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a C9x15?
About the strong axis, Ix = 51 in⁴ (2,123 cm⁴) with section modulus Sx = 11.3 in³. About the weak axis, Iy = 1.91 in⁴ and Sy = 1.01 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
C9x15 or C9x20 — what does one size up change?
C9x20 is about 33% heavier (20 vs 15 lb/ft) but about 19% stiffer (Ix 60.9 vs 51 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About