HSS2x2x3/16 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS2x2x3/16 is an American hollow structural section (HSS) 2×2 inches (50.8×50.8 mm) with a nominal 0.188 in wall, weighing 4.32 pounds per foot (6.4 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
HSS2x2x3/16: cross-section drawn to scale from the AISC dimensions (2 × 2 × 0.188 in)Dimensions
| Height h | 2 in (50.8 mm) |
| Width b | 2 in (50.8 mm) |
| Nominal wall t | 0.188 in (4.8 mm) |
| Design wall (0.93t) | 0.175 in (4.4 mm) |
Weight & Cross-Section
| Weight per foot | 4.32 lb/ft (6.4 kg/m) |
| 20 ft bar | 86 lb |
| 40 ft bar | 173 lb |
| Area A | 1.19 in² (7.7 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 0.64 in⁴ (27 cm⁴) |
| Section modulus Sx | 0.64 in³ (11 cm³) |
| Radius of gyration rx | 0.73 in |
| Moment of inertia Iy | 0.64 in⁴ (27 cm⁴) |
| Section modulus Sy | 0.64 in³ (11 cm³) |
| Radius of gyration ry | 0.73 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| HSS2x2x1/8 | 2 × 2 | 3.05 | 0.49 | 0.49 | −29 % | −24 % |
| HSS2x2x3/16 (this page) | 2 × 2 | 4.32 | 0.64 | 0.64 | — | — |
| HSS2x2x1/4 | 2 × 2 | 5.41 | 0.75 | 0.75 | +25 % | +17 % |
Deflection example
A simply supported HSS2x2x3/16 spanning 3 ft with a 10 kip point load at midspan deflects 0.52 in (E = 29,000 ksi, Ix = 0.64 in⁴). The L/360 serviceability limit for this span is 0.1 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS2x2x3/16 tube weigh?
HSS2x2x3/16 weighs 4.32 pounds per foot (6.4 kg/m). A 20 ft bar weighs 86 lb and a 40 ft bar 173 lb.
What are the dimensions of a HSS2x2x3/16?
HSS2x2x3/16 is 2×2 in (50.8×50.8 mm) outside, with a nominal wall of 0.188 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.175 in) — the section properties listed already account for this.
What are the dimensions of a HSS2x2x3/16 in mm?
HSS2x2x3/16 is 50.8×50.8 mm outside with a nominal wall of 4.8 mm. In metric section properties: Ix = 27 cm⁴, Sx = 11 cm³.
How much does a HSS2x2x3/16 weigh in kg?
6.4 kg per meter. A 6 m bar weighs 39 kg and a 12 m bar 77 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS2x2x3/16?
About the strong axis, Ix = 0.64 in⁴ (27 cm⁴) with section modulus Sx = 0.64 in³. About the weak axis, Iy = 0.64 in⁴ and Sy = 0.64 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS2x2x3/16 or HSS2x2x1/4 — what does one size up change?
HSS2x2x1/4 is about 25% heavier (5.41 vs 4.32 lb/ft) but about 17% stiffer (Ix 0.75 vs 0.64 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About