HSS4x3x1/4 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS4x3x1/4 is an American hollow structural section (HSS) 4×3 inches (101.6×76.2 mm) with a nominal 0.25 in wall, weighing 10.51 pounds per foot (15.6 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
HSS4x3x1/4: cross-section drawn to scale from the AISC dimensions (4 × 3 × 0.25 in)Dimensions
| Height h | 4 in (101.6 mm) |
| Width b | 3 in (76.2 mm) |
| Nominal wall t | 0.25 in (6.4 mm) |
| Design wall (0.93t) | 0.233 in (5.9 mm) |
Weight & Cross-Section
| Weight per foot | 10.51 lb/ft (15.6 kg/m) |
| 20 ft bar | 210 lb |
| 40 ft bar | 420 lb |
| Area A | 2.91 in² (18.8 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 6.15 in⁴ (256 cm⁴) |
| Section modulus Sx | 3.07 in³ (50 cm³) |
| Radius of gyration rx | 1.45 in |
| Moment of inertia Iy | 3.91 in⁴ (163 cm⁴) |
| Section modulus Sy | 2.61 in³ (43 cm³) |
| Radius of gyration ry | 1.16 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| HSS4x3x1/4 (this page) | 4 × 3 | 10.51 | 6.15 | 3.07 | — | — |
Deflection example
A simply supported HSS4x3x1/4 spanning 6 ft with a 10 kip point load at midspan deflects 0.44 in (E = 29,000 ksi, Ix = 6.15 in⁴). The L/360 serviceability limit for this span is 0.2 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS4x3x1/4 tube weigh?
HSS4x3x1/4 weighs 10.51 pounds per foot (15.6 kg/m). A 20 ft bar weighs 210 lb and a 40 ft bar 420 lb.
What are the dimensions of a HSS4x3x1/4?
HSS4x3x1/4 is 4×3 in (101.6×76.2 mm) outside, with a nominal wall of 0.25 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.233 in) — the section properties listed already account for this.
What are the dimensions of a HSS4x3x1/4 in mm?
HSS4x3x1/4 is 101.6×76.2 mm outside with a nominal wall of 6.4 mm. In metric section properties: Ix = 256 cm⁴, Sx = 50 cm³.
How much does a HSS4x3x1/4 weigh in kg?
15.6 kg per meter. A 6 m bar weighs 94 kg and a 12 m bar 188 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS4x3x1/4?
About the strong axis, Ix = 6.15 in⁴ (256 cm⁴) with section modulus Sx = 3.07 in³. About the weak axis, Iy = 3.91 in⁴ and Sy = 2.61 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About