HSS5x5x1/2 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS5x5x1/2 is an American hollow structural section (HSS) 5×5 inches (127×127 mm) with a nominal 0.5 in wall, weighing 28.43 pounds per foot (42.3 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
HSS5x5x1/2: cross-section drawn to scale from the AISC dimensions (5 × 5 × 0.5 in)Dimensions
| Height h | 5 in (127 mm) |
| Width b | 5 in (127 mm) |
| Nominal wall t | 0.5 in (12.7 mm) |
| Design wall (0.93t) | 0.465 in (11.8 mm) |
Weight & Cross-Section
| Weight per foot | 28.43 lb/ft (42.3 kg/m) |
| 20 ft bar | 569 lb |
| 40 ft bar | 1,137 lb |
| Area A | 7.88 in² (50.8 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 26 in⁴ (1,082 cm⁴) |
| Section modulus Sx | 10.4 in³ (170 cm³) |
| Radius of gyration rx | 1.82 in |
| Moment of inertia Iy | 26 in⁴ (1,082 cm⁴) |
| Section modulus Sy | 10.4 in³ (170 cm³) |
| Radius of gyration ry | 1.82 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| HSS5x5x3/8 | 5 × 5 | 22.37 | 21.7 | 8.68 | −21 % | −17 % |
| HSS5x5x1/2 (this page) | 5 × 5 | 28.43 | 26 | 10.4 | — | — |
Deflection example
A simply supported HSS5x5x1/2 spanning 8 ft with a 10 kip point load at midspan deflects 0.24 in (E = 29,000 ksi, Ix = 26 in⁴). The L/360 serviceability limit for this span is 0.27 in — the shape passes this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS5x5x1/2 tube weigh?
HSS5x5x1/2 weighs 28.43 pounds per foot (42.3 kg/m). A 20 ft bar weighs 569 lb and a 40 ft bar 1,137 lb.
What are the dimensions of a HSS5x5x1/2?
HSS5x5x1/2 is 5×5 in (127×127 mm) outside, with a nominal wall of 0.5 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.465 in) — the section properties listed already account for this.
What are the dimensions of a HSS5x5x1/2 in mm?
HSS5x5x1/2 is 127×127 mm outside with a nominal wall of 12.7 mm. In metric section properties: Ix = 1,082 cm⁴, Sx = 170 cm³.
How much does a HSS5x5x1/2 weigh in kg?
42.3 kg per meter. A 6 m bar weighs 254 kg and a 12 m bar 508 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS5x5x1/2?
About the strong axis, Ix = 26 in⁴ (1,082 cm⁴) with section modulus Sx = 10.4 in³. About the weak axis, Iy = 26 in⁴ and Sy = 10.4 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS5x5x1/2 or HSS5x5x3/8 — what does one size down change?
HSS5x5x3/8 is about 21% lighter (22.37 vs 28.43 lb/ft) but about 17% less stiff (Ix 21.7 vs 26 in⁴). Check deflection before downsizing — stiffness falls much faster than weight.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About