HSS5x5x3/16 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS5x5x3/16 is an American hollow structural section (HSS) 5×5 inches (127×127 mm) with a nominal 0.188 in wall, weighing 11.97 pounds per foot (17.8 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
Dimensions
| Height h | 5 in (127 mm) |
| Width b | 5 in (127 mm) |
| Nominal wall t | 0.188 in (4.8 mm) |
| Design wall (0.93t) | 0.175 in (4.4 mm) |
Weight & Cross-Section
| Weight per foot | 11.97 lb/ft (17.8 kg/m) |
| 20 ft bar | 239 lb |
| 40 ft bar | 479 lb |
| Area A | 3.28 in² (21.2 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 12.6 in⁴ (524 cm⁴) |
| Section modulus Sx | 5.03 in³ (82 cm³) |
| Radius of gyration rx | 1.96 in |
| Moment of inertia Iy | 12.6 in⁴ (524 cm⁴) |
| Section modulus Sy | 5.03 in³ (82 cm³) |
| Radius of gyration ry | 1.96 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| HSS5x5x3/16 (this page) | 5 × 5 | 11.97 | 12.6 | 5.03 | — | — |
| HSS5x5x1/4 | 5 × 5 | 15.62 | 16 | 6.41 | +30 % | +27 % |
Deflection example
A simply supported HSS5x5x3/16 spanning 8 ft with a 10 kip point load at midspan deflects 0.5 in (E = 29,000 ksi, Ix = 12.6 in⁴). The L/360 serviceability limit for this span is 0.27 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS5x5x3/16 tube weigh?
HSS5x5x3/16 weighs 11.97 pounds per foot (17.8 kg/m). A 20 ft bar weighs 239 lb and a 40 ft bar 479 lb.
What are the dimensions of a HSS5x5x3/16?
HSS5x5x3/16 is 5×5 in (127×127 mm) outside, with a nominal wall of 0.188 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.175 in) — the section properties listed already account for this.
What are the dimensions of a HSS5x5x3/16 in mm?
HSS5x5x3/16 is 127×127 mm outside with a nominal wall of 4.8 mm. In metric section properties: Ix = 524 cm⁴, Sx = 82 cm³.
How much does a HSS5x5x3/16 weigh in kg?
17.8 kg per meter. A 6 m bar weighs 107 kg and a 12 m bar 214 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS5x5x3/16?
About the strong axis, Ix = 12.6 in⁴ (524 cm⁴) with section modulus Sx = 5.03 in³. About the weak axis, Iy = 12.6 in⁴ and Sy = 5.03 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS5x5x3/16 or HSS5x5x1/4 — what does one size up change?
HSS5x5x1/4 is about 30% heavier (15.62 vs 11.97 lb/ft) but about 27% stiffer (Ix 16 vs 12.6 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About