HSS6x4x1/4 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS6x4x1/4 is an American hollow structural section (HSS) 6×4 inches (152.4×101.6 mm) with a nominal 0.25 in wall, weighing 15.62 pounds per foot (23.2 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
Dimensions
| Height h | 6 in (152.4 mm) |
| Width b | 4 in (101.6 mm) |
| Nominal wall t | 0.25 in (6.4 mm) |
| Design wall (0.93t) | 0.233 in (5.9 mm) |
Weight & Cross-Section
| Weight per foot | 15.62 lb/ft (23.2 kg/m) |
| 20 ft bar | 312 lb |
| 40 ft bar | 625 lb |
| Area A | 4.3 in² (27.7 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 20.9 in⁴ (870 cm⁴) |
| Section modulus Sx | 6.96 in³ (114 cm³) |
| Radius of gyration rx | 2.2 in |
| Moment of inertia Iy | 11.1 in⁴ (462 cm⁴) |
| Section modulus Sy | 5.56 in³ (91 cm³) |
| Radius of gyration ry | 1.61 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| HSS6x4x1/4 (this page) | 6 × 4 | 15.62 | 20.9 | 6.96 | — | — |
| HSS6x4x5/16 | 6 × 4 | 19.08 | 24.8 | 8.27 | +22 % | +19 % |
Deflection example
A simply supported HSS6x4x1/4 spanning 10 ft with a 10 kip point load at midspan deflects 0.59 in (E = 29,000 ksi, Ix = 20.9 in⁴). The L/360 serviceability limit for this span is 0.33 in — the shape does NOT pass this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS6x4x1/4 tube weigh?
HSS6x4x1/4 weighs 15.62 pounds per foot (23.2 kg/m). A 20 ft bar weighs 312 lb and a 40 ft bar 625 lb.
What are the dimensions of a HSS6x4x1/4?
HSS6x4x1/4 is 6×4 in (152.4×101.6 mm) outside, with a nominal wall of 0.25 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.233 in) — the section properties listed already account for this.
What are the dimensions of a HSS6x4x1/4 in mm?
HSS6x4x1/4 is 152.4×101.6 mm outside with a nominal wall of 6.4 mm. In metric section properties: Ix = 870 cm⁴, Sx = 114 cm³.
How much does a HSS6x4x1/4 weigh in kg?
23.2 kg per meter. A 6 m bar weighs 139 kg and a 12 m bar 279 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS6x4x1/4?
About the strong axis, Ix = 20.9 in⁴ (870 cm⁴) with section modulus Sx = 6.96 in³. About the weak axis, Iy = 11.1 in⁴ and Sy = 5.56 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS6x4x1/4 or HSS6x4x5/16 — what does one size up change?
HSS6x4x5/16 is about 22% heavier (19.08 vs 15.62 lb/ft) but about 19% stiffer (Ix 24.8 vs 20.9 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About