HSS8x6x1/2 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS8x6x1/2 is an American hollow structural section (HSS) 8×6 inches (203.2×152.4 mm) with a nominal 0.5 in wall, weighing 42.05 pounds per foot (62.6 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
HSS8x6x1/2: cross-section drawn to scale from the AISC dimensions (8 × 6 × 0.5 in)Dimensions
| Height h | 8 in (203.2 mm) |
| Width b | 6 in (152.4 mm) |
| Nominal wall t | 0.5 in (12.7 mm) |
| Design wall (0.93t) | 0.465 in (11.8 mm) |
Weight & Cross-Section
| Weight per foot | 42.05 lb/ft (62.6 kg/m) |
| 20 ft bar | 841 lb |
| 40 ft bar | 1,682 lb |
| Area A | 11.6 in² (74.8 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 98.2 in⁴ (4,087 cm⁴) |
| Section modulus Sx | 24.6 in³ (403 cm³) |
| Radius of gyration rx | 2.91 in |
| Moment of inertia Iy | 62.5 in⁴ (2,601 cm⁴) |
| Section modulus Sy | 20.8 in³ (341 cm³) |
| Radius of gyration ry | 2.32 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| HSS8x6x3/8 | 8 × 6 | 32.58 | 79.1 | 19.8 | −23 % | −19 % |
| HSS8x6x1/2 (this page) | 8 × 6 | 42.05 | 98.2 | 24.6 | — | — |
Deflection example
A simply supported HSS8x6x1/2 spanning 13 ft with a 10 kip point load at midspan deflects 0.28 in (E = 29,000 ksi, Ix = 98.2 in⁴). The L/360 serviceability limit for this span is 0.43 in — the shape passes this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS8x6x1/2 tube weigh?
HSS8x6x1/2 weighs 42.05 pounds per foot (62.6 kg/m). A 20 ft bar weighs 841 lb and a 40 ft bar 1,682 lb.
What are the dimensions of a HSS8x6x1/2?
HSS8x6x1/2 is 8×6 in (203.2×152.4 mm) outside, with a nominal wall of 0.5 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.465 in) — the section properties listed already account for this.
What are the dimensions of a HSS8x6x1/2 in mm?
HSS8x6x1/2 is 203.2×152.4 mm outside with a nominal wall of 12.7 mm. In metric section properties: Ix = 4,087 cm⁴, Sx = 403 cm³.
How much does a HSS8x6x1/2 weigh in kg?
62.6 kg per meter. A 6 m bar weighs 375 kg and a 12 m bar 751 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS8x6x1/2?
About the strong axis, Ix = 98.2 in⁴ (4,087 cm⁴) with section modulus Sx = 24.6 in³. About the weak axis, Iy = 62.5 in⁴ and Sy = 20.8 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS8x6x1/2 or HSS8x6x3/8 — what does one size down change?
HSS8x6x3/8 is about 23% lighter (32.58 vs 42.05 lb/ft) but about 19% less stiff (Ix 79.1 vs 98.2 in⁴). Check deflection before downsizing — stiffness falls much faster than weight.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About