Ø28 Rebar — Weight, Area & Ordering Numbers
Ribbed reinforcing bar B500 per EN 10080 / DIN 488
Ø28 rebar weighs 4.83 kg per meter — the nominal value every supplier and engineer uses, from the 616 mm² nominal cross-section at 7,850 kg/m³ (ribs are already accounted for: the nominal diameter is defined so that mass, not outside size, matches). A standard 12 m mill bar weighs 57.96 kg, so one tonne is about 17 bars or 207 meters.
These numbers are what you need to turn a cutting list in meters into an order in kilograms — and to check a delivery note against what actually arrived on the truck.
Ø28 rebar: nominal cross-section drawn to scale (d = 28 mm, A = 616 mm²)Size & Weight
| Nominal diameter | 28 mm |
| Nominal cross-section A | 616 mm² |
| Weight per meter | 4.83 kg/m |
Ordering Numbers
| Weight of a 6 m bar | 28.98 kg |
| Weight of a 12 m bar | 57.96 kg |
| Bars per tonne (12 m) | 17 |
| Meters per tonne | 207 m |
Frequently Asked Questions
How much does 28 mm rebar weigh per meter?
4.83 kg per meter (nominal, B500 per EN 10080). The quick site formula is d²/162: 28² / 162 ≈ 4.835 kg/m.
How many Ø28 bars are in a tonne?
About 17 bars of 12 m (57.96 kg each), or 34 bars of 6 m. One tonne of Ø28 is roughly 207 meters of bar.
What is the cross-section area of Ø28 rebar?
616 mm² nominal — the value used in reinforcement schedules. For example, 5 bars of Ø28 give 3,080 mm² of steel.
What is the US equivalent of Ø28 rebar?
The closest US bar is #9 (28.65 mm, 5.06 kg/m). US sizes are numbered in eighths of an inch, so exact matches are rare — check the required steel area, not just the diameter.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About