UPN 220 — Dimensions, Weight & Section Properties
UPN channel per DIN 1026-1
UPN 220 is a UPN channel per DIN 1026-1, 220 mm tall and 80 mm wide, weighing 29.4 kg per meter. All dimensions and section properties below are the standard published values used in structural design across Europe.
Typical uses: floor beams, columns, frames, and general steel construction. For a quick strength check, use the deflection example below or open the beam calculator with your own span and load.
UPN 220: cross-section drawn to scale from the tabulated dimensions (h 220, b 80, tw 9, tf 12.5, r 12.5 mm)Dimensions (mm)
| Height h | 220 mm |
| Flange width b | 80 mm |
| Web thickness tₘ | 9 mm |
| Flange thickness tᶠ | 12.5 mm |
| Root radius r | 12.5 mm |
Weight & Cross-Section
| Weight per meter | 29.4 kg/m |
| Weight of a 6 m bar | 176.4 kg |
| Weight of a 12 m bar | 352.8 kg |
| Cross-section area A | 37.4 cm² |
Section Properties (strong / weak axis)
| Moment of inertia Iₓ | 2,690 cm⁴ |
| Section modulus Wₓ | 245 cm³ |
| Radius of gyration iₓ | 8.48 cm |
| Moment of inertia Iᵧ | 197 cm⁴ |
| Section modulus Wᵧ | 33.6 cm³ |
| Radius of gyration iᵧ | 2.3 cm |
Compared with the neighbouring sizes
| Profile | h × b (mm) | G (kg/m) | Iₓ (cm⁴) | Wₓ (cm³) | Δ weight | Δ Iₓ |
|---|
| UPN 200 | 200 × 75 | 25.3 | 1,910 | 191 | −14 % | −29 % |
| UPN 220 (this page) | 220 × 80 | 29.4 | 2,690 | 245 | — | — |
| UPN 240 | 240 × 85 | 33.2 | 3,600 | 300 | +13 % | +34 % |
Deflection example
A simply supported UPN 220 spanning 4 m with a 10 kN point load at midspan deflects 2.36 mm (E = 210 GPa, Ix = 2,690 cm⁴). The L/360 serviceability limit for this span is 11.1 mm — the profile passes this quick check.
Calculate your own span and load →
Frequently Asked Questions
How much does UPN 220 weigh?
UPN 220 weighs 29.4 kg per meter. A standard 6 m bar weighs 176.4 kg and a 12 m bar 352.8 kg. The weight follows from the cross-section area of 37.4 cm² multiplied by the steel density of 7,850 kg/m³.
What are the dimensions of UPN 220?
UPN 220 is 220 mm tall and 80 mm wide, with a web thickness of 9 mm, a flange thickness of 12.5 mm, and a root radius of 12.5 mm, per DIN 1026-1.
What is the moment of inertia of UPN 220?
About the strong axis, Ix = 2,690 cm⁴ with a section modulus Wx = 245 cm³. About the weak axis, Iy = 197 cm⁴ and Wy = 33.6 cm³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
UPN 220 or UPN 240 — what does one size up change?
UPN 240 is about 13% heavier (33.2 vs 29.4 kg/m) but about 34% stiffer (Ix 3,600 vs 2,690 cm⁴). Going one size up is usually the cheapest way to cut deflection, because stiffness grows much faster than weight.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About