HSS10x10x1/2 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS10x10x1/2 is an American hollow structural section (HSS) 10×10 inches (254×254 mm) with a nominal 0.5 in wall, weighing 62.46 pounds per foot (93 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
Dimensions
| Height h | 10 in (254 mm) |
| Width b | 10 in (254 mm) |
| Nominal wall t | 0.5 in (12.7 mm) |
| Design wall (0.93t) | 0.465 in (11.8 mm) |
Weight & Cross-Section
| Weight per foot | 62.46 lb/ft (93 kg/m) |
| 20 ft bar | 1,249 lb |
| 40 ft bar | 2,498 lb |
| Area A | 17.2 in² (111 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 256 in⁴ (10,655 cm⁴) |
| Section modulus Sx | 51.2 in³ (839 cm³) |
| Radius of gyration rx | 3.86 in |
| Moment of inertia Iy | 256 in⁴ (10,655 cm⁴) |
| Section modulus Sy | 51.2 in³ (839 cm³) |
| Radius of gyration ry | 3.86 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|---|---|---|---|---|---|
| HSS10x10x3/8 | 10 × 10 | 47.9 | 202 | 40.4 | −23 % | −21 % |
| HSS10x10x1/2 (this page) | 10 × 10 | 62.46 | 256 | 51.2 | — | — |
| HSS10x10x5/8 | 10 × 10 | 76.33 | 304 | 60.8 | +22 % | +19 % |
Deflection example
A simply supported HSS10x10x1/2 spanning 16 ft with a 10 kip point load at midspan deflects 0.2 in (E = 29,000 ksi, Ix = 256 in⁴). The L/360 serviceability limit for this span is 0.53 in — the shape passes this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS10x10x1/2 tube weigh?
HSS10x10x1/2 weighs 62.46 pounds per foot (93 kg/m). A 20 ft bar weighs 1,249 lb and a 40 ft bar 2,498 lb.
What are the dimensions of a HSS10x10x1/2?
HSS10x10x1/2 is 10×10 in (254×254 mm) outside, with a nominal wall of 0.5 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.465 in) — the section properties listed already account for this.
What are the dimensions of a HSS10x10x1/2 in mm?
HSS10x10x1/2 is 254×254 mm outside with a nominal wall of 12.7 mm. In metric section properties: Ix = 10,655 cm⁴, Sx = 839 cm³.
How much does a HSS10x10x1/2 weigh in kg?
93 kg per meter. A 6 m bar weighs 558 kg and a 12 m bar 1,115 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS10x10x1/2?
About the strong axis, Ix = 256 in⁴ (10,655 cm⁴) with section modulus Sx = 51.2 in³. About the weak axis, Iy = 256 in⁴ and Sy = 51.2 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS10x10x1/2 or HSS10x10x5/8 — what does one size up change?
HSS10x10x5/8 is about 22% heavier (76.33 vs 62.46 lb/ft) but about 19% stiffer (Ix 304 vs 256 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About