HSS10x10x5/8 — Dimensions, Weight & Section Properties
Hollow structural section per ASTM A500 / AISC Steel Construction Manual
HSS10x10x5/8 is an American hollow structural section (HSS) 10×10 inches (254×254 mm) with a nominal 0.625 in wall, weighing 76.33 pounds per foot (113.6 kg/m). Section properties below are the AISC published values, computed with the A500 design wall thickness of 0.93×nominal — with metric equivalents alongside.
Typical uses: columns, braces, truss members, equipment frames, and architectural steel — closed sections excel in compression and torsion and take paint beautifully. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
HSS10x10x5/8: cross-section drawn to scale from the AISC dimensions (10 × 10 × 0.625 in)Dimensions
| Height h | 10 in (254 mm) |
| Width b | 10 in (254 mm) |
| Nominal wall t | 0.625 in (15.9 mm) |
| Design wall (0.93t) | 0.581 in (14.8 mm) |
Weight & Cross-Section
| Weight per foot | 76.33 lb/ft (113.6 kg/m) |
| 20 ft bar | 1,527 lb |
| 40 ft bar | 3,053 lb |
| Area A | 21 in² (135.5 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 304 in⁴ (12,653 cm⁴) |
| Section modulus Sx | 60.8 in³ (996 cm³) |
| Radius of gyration rx | 3.8 in |
| Moment of inertia Iy | 304 in⁴ (12,653 cm⁴) |
| Section modulus Sy | 60.8 in³ (996 cm³) |
| Radius of gyration ry | 3.8 in |
Compared with the neighbouring sizes
| Shape | h × b (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| HSS10x10x1/2 | 10 × 10 | 62.46 | 256 | 51.2 | −18 % | −16 % |
| HSS10x10x5/8 (this page) | 10 × 10 | 76.33 | 304 | 60.8 | — | — |
Deflection example
A simply supported HSS10x10x5/8 spanning 16 ft with a 10 kip point load at midspan deflects 0.17 in (E = 29,000 ksi, Ix = 304 in⁴). The L/360 serviceability limit for this span is 0.53 in — the shape passes this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a HSS10x10x5/8 tube weigh?
HSS10x10x5/8 weighs 76.33 pounds per foot (113.6 kg/m). A 20 ft bar weighs 1,527 lb and a 40 ft bar 3,053 lb.
What are the dimensions of a HSS10x10x5/8?
HSS10x10x5/8 is 10×10 in (254×254 mm) outside, with a nominal wall of 0.625 in. Note that A500 tolerances put the design wall at 0.93×nominal (0.581 in) — the section properties listed already account for this.
What are the dimensions of a HSS10x10x5/8 in mm?
HSS10x10x5/8 is 254×254 mm outside with a nominal wall of 15.9 mm. In metric section properties: Ix = 12,653 cm⁴, Sx = 996 cm³.
How much does a HSS10x10x5/8 weigh in kg?
113.6 kg per meter. A 6 m bar weighs 682 kg and a 12 m bar 1,363 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a HSS10x10x5/8?
About the strong axis, Ix = 304 in⁴ (12,653 cm⁴) with section modulus Sx = 60.8 in³. About the weak axis, Iy = 304 in⁴ and Sy = 60.8 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
HSS10x10x5/8 or HSS10x10x1/2 — what does one size down change?
HSS10x10x1/2 is about 18% lighter (62.46 vs 76.33 lb/ft) but about 16% less stiff (Ix 256 vs 304 in⁴). Check deflection before downsizing — stiffness falls much faster than weight.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About