SHS 80×80 — Weight & Section Properties
square hollow section (SHS) per EN 10219 (cold formed)
SHS 80×80 is a square hollow section (SHS) with an outside dimension of 80×80 mm, available in wall thicknesses of 3, 4, 5, 6 mm — from 7.07 to 13.2 kg per meter. The table below lists weight and section properties for every standard thickness, computed from the exact EN 10219-2 corner geometry (7,850 kg/m³).
Typical uses: frames, columns, railings, machine bases, and general steel construction. Every row can be checked in the weight or deflection calculator with one click below.
SHS 80×80 × 5: cross-section drawn to scale (80×80 mm, t = 5 mm shown — the most common wall)SHS 80×80 — all wall thicknesses
| t (mm) | G (kg/m) | A (cm²) | Ix (cm⁴) | Wx (cm³) | ix (cm) | Iy (cm⁴) | Wy (cm³) | iy (cm) |
|---|
| 3 | 7.07 | 9.01 | 87.8 | 22 | 3.12 | 87.8 | 22 | 3.12 |
| 4 | 9.22 | 11.7 | 111 | 27.8 | 3.07 | 111 | 27.8 | 3.07 |
| 5 | 11.3 | 14.4 | 131 | 32.9 | 3.03 | 131 | 32.9 | 3.03 |
| 6 | 13.2 | 16.8 | 149 | 37.3 | 2.98 | 149 | 37.3 | 2.98 |
Frequently Asked Questions
How much does SHS 80×80 weigh?
It depends on the wall thickness: from 7.07 kg/m at t = 3 mm up to 13.2 kg/m at t = 6 mm. With the common t = 5 mm it weighs 11.3 kg/m — a 6 m bar is 67.8 kg.
Which wall thicknesses does SHS 80×80 come in?
The standard EN 10219 program for 80×80 mm covers t = 3, 4, 5, 6 mm. Other thicknesses exist by mill order; stockholders typically carry the ones in this table.
Which standard defines SHS 80×80?
These values follow EN 10219 (cold formed structural hollow sections) with its corner geometry — outer radius 2t, 2.5t or 3t depending on wall thickness. Hot finished equivalents per EN 10210 have tighter corners and marginally different weights and properties.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About