W14x283 — Dimensions, Weight & Section Properties
American wide-flange (W) beam per ASTM A6 / AISC Steel Construction Manual
W14x283 is an American wide-flange beam 16.7 inches (424.2 mm) deep with a 16.1 in (408.9 mm) flange, weighing 283 pounds per foot (421.2 kg/m) — that is what the "283" in the designation means. All values below are the standard AISC published section properties used in US structural design, with metric equivalents alongside.
Typical uses: floor and roof framing, columns, headers, and general steel construction. For a quick stiffness check, see the deflection example below or open the beam calculator with your own span and load.
W14x283: cross-section drawn to scale from the AISC dimensions (d 16.7, bf 16.1, tw 1.29, tf 2.07 in)Dimensions
| Depth d | 16.7 in (424.2 mm) |
| Flange width bf | 16.1 in (408.9 mm) |
| Web thickness tw | 1.29 in (32.8 mm) |
| Flange thickness tf | 2.07 in (52.6 mm) |
Weight & Cross-Section
| Weight per foot | 283 lb/ft (421.2 kg/m) |
| 20 ft bar | 5,660 lb |
| 40 ft bar | 11,320 lb |
| Area A | 83.3 in² (537.4 cm²) |
Section Properties (strong / weak axis)
| Moment of inertia Ix | 3,840 in⁴ (159,832 cm⁴) |
| Section modulus Sx | 459 in³ (7,522 cm³) |
| Radius of gyration rx | 6.79 in |
| Moment of inertia Iy | 1,440 in⁴ (59,937 cm⁴) |
| Section modulus Sy | 179 in³ (2,933 cm³) |
| Radius of gyration ry | 4.17 in |
Compared with the neighbouring sizes
| Shape | d × bf (in) | lb/ft | Ix (in⁴) | Sx (in³) | Δ weight | Δ Ix |
|---|
| W14x257 | 16.4 × 16 | 257 | 3,400 | 415 | −9 % | −11 % |
| W14x283 (this page) | 16.7 × 16.1 | 283 | 3,840 | 459 | — | — |
| W14x311 | 17.1 × 16.2 | 311 | 4,330 | 506 | +10 % | +13 % |
Deflection example
A simply supported W14x283 spanning 27 ft with a 10 kip point load at midspan deflects 0.06 in (E = 29,000 ksi, Ix = 3,840 in⁴). The L/360 serviceability limit for this span is 0.9 in — the shape passes this quick check.
Calculate with your own span and load →
Frequently asked questions
How much does a W14x283 beam weigh?
W14x283 weighs 283 pounds per foot (421.2 kg/m). The number after the "x" in the designation is always the weight in lb/ft. A 20 ft bar weighs 5,660 lb and a 40 ft bar 11,320 lb.
What are the dimensions of a W14x283?
W14x283 is 16.7 in (424.2 mm) deep with a 16.1 in (408.9 mm) wide flange. The web is 1.29 in thick and the flanges are 2.07 in thick. Note the actual depth differs from the nominal W14 label — always design with the actual value.
What are the dimensions of a W14x283 in mm?
W14x283 is 424.2 mm deep with a 408.9 mm wide flange; the web is 32.8 mm and the flange 52.6 mm thick. In metric section properties: Ix = 159,832 cm⁴, Sx = 7,522 cm³.
How much does a W14x283 weigh in kg?
421.2 kg per meter. A 6 m bar weighs 2,527 kg and a 12 m bar 5,054 kg — handy when ordering US shapes from metric suppliers.
What is the moment of inertia of a W14x283?
About the strong axis, Ix = 3,840 in⁴ (159,832 cm⁴) with section modulus Sx = 459 in³. About the weak axis, Iy = 1,440 in⁴ and Sy = 179 in³. Use the beam deflection calculator to turn these into deflection and stress for your span and load.
W14x283 or W14x311 — what does one size up change?
W14x311 is about 10% heavier (311 vs 283 lb/ft) but about 13% stiffer (Ix 4,330 vs 3,840 in⁴). Going one step up within the same depth group is usually the cheapest way to cut deflection.
Values are entered from the governing standard’s published tables and cross-checked programmatically against its mass and section formulas before publication. Spotted an error? Write to advertising@metalabout.net — verified corrections ship within days. About